Dec 11
31
Installing A Kitchen Faucet
Before You Begin:
recognize all local plumbing and building codes. Shut off the water supplies. Before installation, unpack the current faucet and sight it for pain. Return the faucet to the carton until you are ready to install it. Carefully examine demolish and supply tubing for any notice of injure and replace if indispensable. For unusual installations, assemble the faucet to the sink before installing the sink. If supply tubes must be cleave, allow for required penetration into shut-off valve.
1. Install the Spout and Handspray
NOTE: Before applying plumbers putty or other sealant to the escutcheon, construct distinct the O-ring is in station in the groove on the interior surface. Apply a bead of plumbers putty or other sealant to the underside of the escutcheon according to the manufacturer’s instructions. Thread the shank nut and washer to the bottom of the shank. Insert the shank from the bottom of the sink. slither the escutcheon over the shank. Thread the spout to the bottom of the shank, then loosen the spout 1/8 of a turn. Loosen the shank 1/8 of a turn. critical! Do not loosen the shank more than 1/2 turn. The spout may not seal, resulting in a leak. Tighten the nut and washer to accept the spray holder to the sink. scramble the gasket (provided) onto the spray holder. glide the spray holder through the mounting hole from above. Securely hand tighten the nut to the spray holder from under the sink. Insert the handspray hose through the spray holder. build the handspray hose to the shank tee using thread sealant.
2. Install the Valve Body
Apply thread sealant to the coupling nut threads of the flexible hoses. Thread the flexible hoses to the valve body outlets and wrench tighten. Do not over tighten. Apply a bead of plumbers putty or other sealant to the underside of the escutcheons according to the manufacturer’s instructions. Insert the valve bodies into the mounting holes from the top of the sink. construct clear the hot valve body is installed in the left-hand hole and the wintry valve body is installed in the right-hand hole. Install a washer and then a nut to the bottom of the valve bodies. Align the valve bodies so the copper tubing faces the outside. Wrench tighten the nuts. purchase any excess plumbers putty. Connect and wrench tighten the hoses to the shank tee. Do not over tighten.
3. Install the Handles
residence the valve stem to the closed set by rotating the stem counterclockwise until it stops. Thread the bonnet onto the escutcheon. Insert the stem extension into the bonnet and press it onto the valve stem. Lever Handles Properly align the lever handle. Press the lever handle onto the stem extension. obtain the lever handle with the screw. Six-Prong Handles salvage the stem extension with the screw. Press the handle onto the stem extension with the text on the ceramic button properly aligned. come by the handle with the setscrew.
4. Install the Supplies
NOTE: If the sink is not installed, install it at this time. Be distinct to follow all instructions packed with the sink. glide the coupling nuts and ferrules onto the supply tubes. acquire the supply tubes and valve body inlets with coupling nuts. Carefully insert the supply tubes into the valve body inlets and shut-off valve outlets (if customary) . area the round ruin of the supply tube squarely to the valve body inlet and supply cessation. Tighten all coupling nuts.
5. Installation Checkout
Ensure that both faucet handles are turned off. Hot is clockwise discontinuance and frigid is counterclockwise halt. Turn on the hot and frigid water supplies. Check for leaks. choose the aerator by turning it counterclockwise. Turn on the hot and chilly faucet handles for one dinky to flush debris from the faucet. conclude the hot and chilly faucet handles. Reattach the aerator by turning it clockwise until hand tight.
Incoming search terms:
- install a kitchen faucet and sprayer
- tool for installing kitchen faucet
- what is a faucet shank
Related posts:
